Tips for Prolong use of Car Wheels and Car Rims

Car enthusiasts anywhere in the world are always passionate about buying new car rims. They want them to look good amplifying their car looks. New wheels for cars tend to enhance your driving performance making it effortless and less noisy. But buying car wheels and then matching them with your alloy rims requires a great effort. People tend to become careless about practical things related to the maintenance and durability of car wheels and alloy rims. Thus, we here at Factory Wheel Warehouse aim to make things easier for you. Below are some important tips for car wheels and car rims for their long-term maintenance.

Picking the correct tire size:

Cars that are having engines ranging below 186 horsepower and are new should not install car wheels that are larger in size than their original car wheels. One is interested in upgrading to larger wheels that may go up a notch by increasing the car wheel size by 1 inch. Going beyond one inch would result in a reduction in fuel economy and burdening extra load on a car engine. The car wheel may also not fit the size leading to extra modifications to rolling out the fender for fitment of extra car wheel size.

Make sure to upgrade the spare wheel:

If you are going to buy new car wheels that are larger than the original wheel size makes sure to upgrade the spare wheel as well. Many times, people upgrade their car wheels and forget to replace their spare wheel making it difficult at times when an accident happens, and the importance of a spare wheel comes into play.

Wheel up-gradation for cars above 186 horsepower:

A car that is above 186 horsepower can easily upgrade the car wheel size by up by 2 inches than its original size. As the engines are more powerful they can easily handle the extra stress without causing too much fuel consumption and loading the engine.

Avoid low profiling:

Low profiling is the fitting of alloy rims on very sleek car wheel elevation having low tire width. Low-profile alloy rims get damaged when they encounter potholes and surfaces that have sharp edges. They might be sanding out in the crowd in looks but they have no significance when it comes to durability. Any uneven surface or road can cause them to hit the car rims hard with the surface of the road bending the car rims.

Black car rims:

One might be a fan of black car rims, but they are very hard to maintain. Yes, they look fascinating but any scratch or damage to the face of the car rims causes them to look equally bad.

Go for Light Weight Wheels:

Lightweight wheels improve your drive by smoothing out your acceleration. Whether you are looking to improve your quarter-mile times, take fast and sharp turns, increase fuel efficiency or save yourselves some money. Yes, wheel weight is important.

Proper Wheel Alignment and Wheel Balancing:

Make sure to have proper wheel alignment and wheel balancing before taking your car to the road. Wheel alignment is necessary after driving the car for a few months as these angles are very sensitive for maintaining the car's stability. It is for one's safety to keep check of these angles and make sure the car's straight-line stability is maintained.

Staggered or Square Wheel setup:

Confused between square and staggered wheel set up? Well, the decision rests on the way a vehicle is to be used. If your car is to cover lesser miles and requires more performance, then staggered wheel setup is surely the way to go. Whereas if the vehicle requires less performance and has more miles to cover then a square wheel setup can help achieve the required objective.

Car Rims for Off-Roading:

The aluminum rims though being light, tough, and durable might not serve the purpose of off-roading due to them being very expensive. It is a choice that one has to make as steel wheels are effective in really rocky conditions as the bent lip can be easily repaired by simply hammering onto it. On the other hand, this cannot be done for aluminum rims as that is a very tough material to deal with.

Check Your Tire Tread:

It is a good practice to check the tire treads of the car wheels after driving them for two to three months. The aim is to not have a flat tire to stay safe and not damage the car rims. 2/32 on the tire tread gauge is the limit to change the tires for sure. The over-flattening and the under-flattening can also be checked by the tire tread gauge. In case of over-flattening, the tire wears more from the outside than the center. In the case of under-flattening, the tire wears more from the center than the outside.

Conclusion:

The following tips can be used to maintain and sustain the car wheels and car rims in the long run and can help save some bucks. For the best car wheel repair services please visit Elite of Albany while for buying car wheels and car rims one can avail yourself of services from the Factory Wheel Warehouse store near you. The best factory OEM wheels are available at our facility with a wide range of designs. One can also order online from our store to ensure fast delivery and ease of having the car wheels delivered to your doorstep.

For professional customer services about rims and wheels call us at +1 518-579-9260.

 Related Articles: Toyota Corolla Wheels and Rims